** This information is given in good faith, but no warranty, expressed or implied is made. |
|||||
MATERIAL SAFETY DATA SHEET |
90% Tin, 10% Lead ALLOY |
||||
Page 1 of 3 |
ANODES, INGOT, BAR, WIRE |
||||
ASTM B32/QQS571 |
|||||
SECTION 1: IDENTIFICATION |
|||||
Furnished by: |
Grant Manufacturing & Alloying, Inc |
||||
200-C Furnace Street |
|||||
| Birdsboro, Pa 19508 | |||||
Effective Date: |
01/01/01 |
||||
Emergency Phone Number: |
610-404-1380 |
||||
Person to Contact: |
David Charest |
||||
SECTION 2: CONSTITIUENTS |
|||||
CHEMICAL |
CAS# |
%WT |
CARCINOGEN |
TLV |
|
TIN |
7440-31-5 |
90.0 |
NO |
2mg/cu m ACGIH |
|
LEAD |
7439-92-1 |
10.0 |
NO |
0.15mg/cu ACGIH OSHA TWA 0.05mg |
|
ANTIMONY |
7440-36-0 |
0.50 MAX |
NO |
0.5mg/cu ACGIH/OSHA PEL |
|
SECTION 3: PHYSICAL DATA |
|||||
Melting Point |
360-620 degrees |
||||
Boiling Point |
n/ap |
||||
Vapor Pressure |
not volatile |
||||
Vapor Density |
not volatile |
||||
Solubility in Water |
nil |
||||
Apperance/Color |
silver to gray |
||||
Specific Gravity, 68-77 F |
7-11 (approx), depending on alloy |
||||
Odor |
none |
||||
% Volatile |
nil |
||||
pH |
n/ap |
||||
Evaporation Rate |
n/ap |
||||
SECTION 4: FIRE AND EXPLOSION HAZARD DATA |
|||||
Flash Point |
not flammable |
||||
Flammable Limits |
n/ap |
||||
Extinguishing Methods |
n/ap |
||||
Fire Fighting Equipment |
If metal is present where there is fire, wear self contained breathing device . |
||||
in case lead fumes |
|||||
SECTION 5: REACTIVITY DATA |
|||||
Stability |
stable |
||||
Conditions to Avoid |
n/ap |
||||
Hazardous Polymerization |
will not occur |
||||
Incompatibility |
strong acids, reducing agents, halogens and oxidizers |
||||
Hazardous Decomposition |
lead fumes at high temperatures (above 750 F) |
||||
MATERIAL SAFETY DATA SHEET |
90% Tin, 10% Lead ALLOY |
||||
ANODES, INGOT, BAR, WIRE |
|||||
ASTM B32/QQS571 |
|||||
SECTION 6: SPILL, LEAK AND DISPOSAL PROCEDURES |
|||||
Actions to take for spills |
allow to solidify, collect and place in sealed drum |
||||
Disposal Method |
return to supplier |
||||
SECTION 7: HEALTH HAZARD INFORMATION |
|||||
Eye |
dust or fumes will be an irritant |
||||
Skin Contact |
not a route of entry to the body |
||||
Skin Absorption |
not a route of entry to the body |
||||
Ingestion |
Ingestion of lead dust or fumes must be avoided. Lead is toxic and cumulative, affecting the |
||||
kidneys and nervous system. Symptons will include anemia, insomnia, weakness, irritability, |
|||||
constipation and stomach pains. |
|||||
Tin is not regarded as toxic, but excessive exposure can cause fever, nausea, diarrhea |
|||||
and stomach cramps. |
|||||
Antimony is toxic and dust and fumes can cause nasal septal ulceration and stomach lining |
|||||
irritation. |
|||||
| Section 8: First Aid Procedures | |||||
| Eyes: | Flush thoroughly with water and call a physician. | ||||
| Skin: | Wash thoroughly with soap and water. | ||||
| Ingestion: | Induce vomiting if person is conscious. Call a physician. | ||||
| Inhalation: | Remove to fresh air. Call a physician. | ||||
| Note to Physician: | Check for effects of antimony | ||||
| Section 9: Special Handling Information | |||||
| Ventilation: | Required to maintain TLV's | ||||
| Respiratory Protection: | Fume Mask required. | ||||
| Eye Protection: | Wear protective goggles. | ||||
| Skin Protection: | Use protective gloves when handling material. | ||||
| Other: | N/A | ||||
| Section 10: Special Procautions & Additional Information | |||||
| Storage: | Store metal in clean dry area, away from heat and chemicals that might react with the material. | ||||
| Section 11: Hazard Rating | |||||
| Based on NFPA and NPCA Systems | |||||
| Health-1 | |||||
| Flammability-0 | |||||
| Reactivity-0 | |||||
| Special Hazzard-W | |||||
| END: | |||||